Your roof takes a beating in Southeast Texas. Those scorching 100°F+ summers, sudden thunderstorms, and relentless humidity don’t just make you uncomfortable—they’re slowly destroying your biggest investment.
Here’s what changes when you choose professional roof coatings: Your energy bills drop dramatically because your roof reflects heat instead of absorbing it. Your home stays cooler without cranking the AC. Most importantly, you get 10-20 more years from your current roof instead of facing an $8,000+ replacement.
The math is simple. Roof coatings cost about half what replacement does, but deliver the same protection and performance you need to weather whatever Southeast Texas throws at you.
We’ve been protecting Silsbee homes since 2018, and we’ve learned a thing or two about what works in Southeast Texas heat. We’re not some out-of-state crew learning on your dime—we’re your neighbors who understand exactly what your roof faces every day.
Our A+ BBB rating and GAF certification aren’t just badges on the wall. They represent thousands of satisfied customers across Hardin County who chose us because we do the job right the first time, with no upfront payments and no surprises.
When hurricane season hits or those summer temperatures soar past 105°F, you want contractors who’ve seen it all before. That’s us.
We start with a thorough inspection to assess your roof’s condition and identify any repairs needed before coating. No point in coating over problems—we fix them first.
Next comes surface preparation. We clean your roof completely, treat any rust or deterioration, and ensure proper adhesion. This step separates professional work from quick fixes that fail in two years.
The coating application itself uses industrial-grade materials applied to manufacturer specifications. We typically apply multiple coats to achieve the proper thickness and coverage. The whole process usually takes 2-3 days depending on your roof size and weather conditions.
Your roof emerges with a seamless, waterproof membrane that reflects heat, prevents leaks, and comes with a manufacturer warranty that can extend up to 20 years.
Ready to get started?
We work with all roof types common in Southeast Texas: metal, asphalt shingles, modified bitumen, single-ply membranes, and flat roofing systems. Each gets the specific coating chemistry it needs to perform in our climate.
Silicone coatings excel here because they handle our humidity and occasional ponding water better than anything else. They also provide superior UV protection—critical when your roof surface hits 150°F+ in summer. For metal roofs, we use specialized formulations that expand and contract with the material.
The local advantage matters more than you might think. We stock materials designed for Gulf Coast conditions, not generic products that work “everywhere.” We also understand Silsbee’s building codes and permit requirements, so your project moves smoothly from start to finish.
Roof coatings typically cost 50-60% less than full replacement. For an average Silsbee home, that means spending around $4,000-5,000 instead of $8,000+ for replacement.
But the savings go beyond upfront costs. Quality roof coatings can extend your roof’s life by 10-20 years, and the reflective properties can cut your cooling costs by up to 40% during our brutal summers. When you factor in energy savings over the coating’s lifespan, the total savings often exceed $10,000.
The key is working with experienced contractors who use proper materials and application techniques. Cheap coatings fail quickly and cost more in the long run.
Yes, if the leaks stem from common issues like deteriorated seams, small cracks, or worn flashing. Roof coatings create a seamless, waterproof membrane that seals these problem areas effectively.
However, coatings aren’t magic. If you have major structural damage, rotted decking, or significant membrane failure, those issues need repair first. We always inspect thoroughly and address underlying problems before applying any coating.
The good news is that most Silsbee homes have roofs in good structural condition that just need protection from our harsh climate. Coatings handle that perfectly while stopping minor leaks that would otherwise become major problems.
Quality roof coatings last 10-20 years in our climate when properly applied and maintained. Silicone coatings tend to perform best here because they handle UV exposure, humidity, and temperature extremes better than other options.
The lifespan depends on several factors: the coating type, application quality, roof condition, and maintenance. We use high-solids coatings with proven track records in Gulf Coast conditions, not budget products that degrade quickly.
What’s unique about coatings is that you can recoat when they eventually wear down, resetting the warranty clock. Many of our customers never need full replacement—they just recoat every 15-20 years at a fraction of replacement cost.
We can coat most roof types common in Silsbee: metal, asphalt shingles, modified bitumen, EPDM, TPO, PVC, and built-up roofing systems. Each requires specific coating chemistry and application techniques.
The roof must be structurally sound and properly dried before coating. We can’t coat over severely damaged membranes, rotted decking, or roofs with major ponding issues. A thorough inspection determines candidacy.
Some roofs aren’t good candidates—like those with extensive granule loss, multiple layers of old coatings, or certain types of deteriorated materials. In those cases, we’ll recommend repair or replacement instead of wasting your money on a coating that won’t perform.
Most homeowners see 20-40% reduction in cooling costs during summer months. The exact savings depend on your roof size, insulation levels, HVAC efficiency, and current roof color.
Dark roofs benefit most because they currently absorb massive amounts of heat. A black roof can reach 150°F+ in summer, while a coated roof stays 20-30 degrees cooler. That temperature difference translates directly to less strain on your AC system.
For an average Silsbee home, that means $300-600 less per year in cooling costs. Over the coating’s 15-20 year lifespan, energy savings often pay for the entire project while you enjoy a more comfortable home.
The process is designed to minimize disruption to your daily routine. Most residential projects take 2-3 days depending on roof size and weather conditions.
Day one involves inspection, minor repairs, and surface preparation. We protect your landscaping and outdoor areas before starting any work. Day two typically covers the main coating application, applied in multiple coats for proper thickness.
You don’t need to leave your home, and we can usually work around your schedule. We clean up completely each day and use low-odor materials. The biggest inconvenience is staying off the roof area during application and cure time.
Local Resources
Useful Links
Other Services we provide in Silsbee
