Your roof doesn’t need to be torn off and replaced when it starts showing wear. A professional roof coating creates a seamless, waterproof barrier that stops leaks cold while reflecting Texas heat away from your building.
You’ll cut cooling costs in half. Most property owners see immediate energy savings of 30-50% because reflective coatings keep your roof surface 80 degrees cooler than standard roofing materials.
The best part? Your business stays open during the entire process. No noise, no debris, no disruption to your daily operations.
We’ve been serving Southeast Texas property owners since 1998. We understand what roofs face in this climate – the scorching summer heat, sudden storms, and humidity that can destroy a roof from the inside out.
We’ve seen every type of roof problem you can imagine. That’s why we only use proven coating systems that stand up to Texas weather year after year.
Our team knows Kenefick and the surrounding Liberty County area. We’ve worked on everything from small commercial buildings to large industrial facilities, and we understand the unique challenges that come with our local climate.
First, we pressure wash your roof to remove dirt, debris, and any failing coating material. This step is critical because the coating needs a clean surface to bond properly.
Next, we apply multiple layers of high-grade coating using professional equipment. Each layer builds on the last to create a seamless membrane that seals every crack, gap, and potential leak point.
The coating cures to form a flexible, waterproof barrier that moves with your roof through temperature changes. Unlike rigid materials that crack, quality coatings expand and contract without losing their seal.
Most jobs are completed within a week, depending on weather and roof size. You’ll have a warranty-backed roof that’s ready to protect your property for decades.
Ready to get started?
We coat all roof types – metal, modified bitumen, built-up, single-ply, and even concrete. Each roof gets a coating system specifically chosen for its material and exposure conditions.
Metal roofs get specialized coatings that stop rust and corrosion while providing superior heat reflection. Flat roofs receive elastomeric coatings that handle ponding water and thermal cycling.
In the Kenefick area, we see a lot of metal buildings and older commercial structures that benefit tremendously from coating restoration. These roofs were built to last, but Texas weather takes its toll over time.
Our coating systems come with 10-20 year warranties, and most roofs outlast their warranty period. When it’s time for maintenance, we can simply recoat over the existing system – no tearoff required.
Roof coating typically costs 50-60% less than complete roof replacement. While a new commercial roof might run $8-15 per square foot, a quality coating system usually costs $3-6 per square foot installed.
The savings go beyond the initial cost. You avoid demolition fees, disposal costs, and the expense of upgrading structural components that often comes with new roof installation. Most coating projects pay for themselves within 2-3 years through energy savings alone.
For a typical 10,000 square foot commercial building in Kenefick, you’re looking at $30,000-60,000 for coating versus $80,000-150,000 for replacement. The math makes sense, especially when the coating can extend your roof life by 15-20 years.
Yes, significantly. Reflective roof coatings can reduce your roof surface temperature by 50-80 degrees compared to dark, aged roofing materials. This translates directly to lower cooling costs.
Most property owners see 20-40% reductions in summer cooling bills. In extreme Texas heat, some buildings with large roof areas see even greater savings. The coating reflects solar heat instead of absorbing it, which means your HVAC system doesn’t work as hard.
We’ve had customers report savings of $200-500 per month during peak summer months. Over the 15-20 year life of the coating, that adds up to substantial savings that often exceed the initial coating cost.
Quality roof coatings are specifically formulated for harsh climates like Texas. Most systems carry 15-20 year warranties, but properly maintained coatings often last 25-30 years.
The key is using the right coating for your roof type and local conditions. Silicone coatings excel in areas with ponding water. Acrylic coatings work well on sloped roofs with good drainage. Urethane coatings provide maximum durability for high-traffic roofs.
Texas weather is tough, but modern coating technology is tougher. These aren’t the coatings from 20 years ago. Today’s formulations resist UV degradation, thermal cycling, and moisture penetration much better than older products.
In most cases, yes. One of the major advantages of coating systems is their renewability. When your coating reaches the end of its service life, we can often apply a new coating directly over the existing one.
We first inspect the existing coating to ensure it’s still well-adhered and hasn’t developed significant issues. Minor repairs might be needed, but full removal is rarely required. This saves tremendous time and money compared to starting over.
Some coating types are more compatible than others for recoating. Silicone coatings, for example, can only be recoated with more silicone. Acrylic and urethane systems offer more flexibility for future recoating options.
In Texas, the ideal application window is typically March through May and September through November. These periods offer moderate temperatures and lower humidity, which help coatings cure properly.
We avoid the peak summer months when possible because extreme heat can cause application problems. Coatings need time to cure before being exposed to intense UV radiation and thermal stress.
Winter applications are possible but weather-dependent. We need several consecutive dry days with temperatures above 50°F for proper curing. Spring and fall generally provide the most consistent weather windows for quality results.
Absolutely. Metal roof coating is one of our most common applications in the Kenefick area. Metal buildings are everywhere in Southeast Texas, and coating is often the most cost-effective way to restore and protect them.
Metal roofs develop rust, lose their factory finish, and start leaking at seams and fasteners over time. A proper coating system stops corrosion, seals all penetrations, and provides decades of additional service life.
We use specialized primers and coatings designed specifically for metal substrates. These products bond chemically to the metal surface and flex with thermal movement. The result is a roof that looks new and performs better than when it was first installed.
Local Resources
Useful Links
Other Services we provide in Kenefick
